Tango TX1

The Tango® TX1, with a 2-year run time and DualSense® Technology, increases worker safety, regardless of bump test frequency, while reducing overall costs.
• DualSense Technology  increases worker safety by using two  sensors to detect the same gas.
• Guaranteed for LifeTM with replaceable sensors and batteries that  extend the life of the instrument.
• Optional AlarmAmpTM increases audible alarms to 110dB.
Specifications:
Instrument Warranty:
• All other sensors are warranted for one year.
Display:
• Segment liquid crystal display (LCD).
Keypad:
• Two buttons.
Case Materials:
• Case top: Polycarbonate with a protective rubber overmold.
• Case bottom: Conductive polycarbonate.
Alarms:
• Three strobe-emitting visual alarm LEDs (two red; one blue).
• 100 decibel (dB) audible alarm at a distance of 10 cm (3.94 in).
Dimensions:
• 99 x 51 x 35 mm.
Weight:
• 126 g.
Temperature Range:
• - 40oC to + 50oC
Humidity Range:
• 15%-95% Non-condensing (continuous).
Sensors:
• CO, CO/H2 low, H2S, NO2, SO2 - Electrochemical sensor technology.
Battery Pack:
• 3.6 V Primary lithium-thionyl chloride (Li-SOCl2); 1.5AH, 2/3AA; replaceable; nonrechargeable;
always on; up to 2-year run time depending on operating conditions.
Data Logging:
• 3 months at 10-second intervals.
Event Logger:
• 60 alarm events.
IP Rating:
• IP66, IP67.
Certifications:
-40 °C to 50 °C (-40 °F to 122 °F)
• ATEX: Ex ia I Ma; Ex ia IIC T4 Ga; Equipment Group/Category: I M1/II 1G
• CSA : Cl I, Gr A-D, T4; Ex ia IIC T4
• IECEx: Ex ia I Ma; Ex ia IIC T4 Ga
• INMETRO: Ex ia I Ma; Ex ia IIC T4 Ga
• UL (C-US): Cl I, Gr A-D, T4; Cl II, Gr E-G; Cl I, Zone 0, AEx ia IIC T4
-20 °C to 50 °C (-4 °F to 122 °F)
• China Ex: Ex ia IIC T4 Ga
• CMA: Ex ia I Ma; H2S, CO
• EAC: PO Ex ia I X; 0 Ex iX IIC T4 X
•  KC: Ex ia IIC T4